-
I have been spending a lot of time experimenting with FreeDV digital voice and am using my rig memories to store the DV preferred frequencies. I am having a problem between klog and freedv 'sometimes…
-
Start TX
Press Record
Talk
Press Record (to stop recording)
Stop Modem
Go to Tools->Start play file from radio
Select the file->Open it
Hit Start
The file plays in the waterfall but is centred…
-
I see this myself in Linux and have heard several of reports of Windows users seeing the same.
I suspect that this may have come to light recently as a side effect of running FreeDV Reporter in a b…
-
I use freedv-gui when operating in analogue modes, it's a useful interface with my USB microphone, I don't use the front panel mic connectors on my radios.
It seems to me that the FreeDV Reporter l…
-
Not sure what's going on, but FreeDV 1.8.10.1 becomes unresponsive when I try to use my uBitx v6 QRP rig, which emulates the Yaesu FT-817 for cat controls. I set the rig model to FT-857 instead and Fr…
-
This change has been added to freedv-gui, apparently to fix a problem with another radio, see here:
https://github.com/drowe67/freedv-gui/pull/385
The change to how the VFOs are selected in free…
-
This happened on versions 1.8.10.1 and below. When I'm on 20m and above and using USB mode, FreeDV will, at random, switch the radio to LSB mode. A similar thing happens on 40m and below when I'm on L…
-
This becomes a problem on 60m in the UK where we use 5366.5kHz and 5403.5kHz.
In FreeDv reporter these round up to 5.367 MHz and 5.404MHz.
Could FreeDV Reporter be modified to accept 4 decimal place…
-
Requirements:
1. Ensure bandwidth of waterfall is sufficient to visualise fading at up to 2 Hz (we can provide test signals).
-
Per the digitalvoice list, apparently the FT-991A will offset the frequency a bit when using FreeDV as the mode gets changed after the frequency. Swapping the order of operations will supposedly fix t…