-
**Describe the bug**
The software can not connect the scope in a normal way. If I start the software first then plug the scope in after 5 sec, I can select the scope in the drop-down and enter the so…
-
The Hantek DSO6022 D&L V1.01 PCB is missing the JP2 connector.
Does anyone have a suggestion where to connect PE0 and PE3 for the AC adjustment?
![IMG_20201003_173405](https://user-images.githubu…
-
Openhantek 30.10.2020_e7e0ec7b built on 64bit Debian with DSO-2090 USB.
No triggering happened after first shot when set to EXT or EXT/10 with EXT connected together with CH1 to 2Vpp 1K test outl…
-
Hi.
I installed the software on a new PC and when I start the program I get the following error:
This occurs on the demo mode too.
I moved to an new laptop. The older PC didn't show this er…
-
**Describe the bug**
Scope does not appear in the drop down list upon launching of the app.
Light next to CH1 remains unlit.
**To Reproduce**
I Installed WinUSB driver using Zadig for VID 04B4 P…
-
I use a Hantek 6022BL wit OpenHantek on Windows 10.
On both channels the signals are always offset by some mV, even when the Probes are connected to GND.
![Offset](https://user-images.githubuser…
-
Can’t seem to get it to run the cli shows communication so that sides ok.. gui side is the issue I’m really new to node here’s my log.. if you can shed any light
info it worked if it ends with ok
1…
-
Everything is grouped in one place, easy to tap without much mouse movement.
Everything happens faster.
A window space opens.
Is it possible to be a permanent / switchable option without dragging t…
zen67 updated
3 years ago
-
**Describe the bug**
Red blinky light when software opens, Upload Firmware: Operation not supported or unimplemented on the platform. Did Hantek brick your upload?
**To Reproduce**
**IMPORTANT:**…
-
Hi
I am trying to retrieve data from an oscilloscope.
Before plugging the oscilloscope i can list the other devices fine:
![devices](https://user-images.githubusercontent.com/53060718/107116759…