-
[There is some information](https://www.thingiverse.com/thing:3672543) about noisy 5v line if the board is powered via 24v adapter.
I've ran into this problem too on my v1.2.
Temperature sens…
-
Hi, I need to supply 5v pwm signal to control my laser. Supposedly this board is said to have PWM TTL support compared to the robin nano V2, but I checked my board and the only empty pins I see are th…
-
### What happened?
Module SIN-4-FP-21 is not reporting power and energy anymore.
It's stuck to 0.
Tried to reconfigure.
Tried to reset module
Tried to delete from z2m and add again
### What did …
-
### Is your feature request related to a problem?
1. Open Cura
2. Check Machine Settings for my Ender-6
M117 Print Starting...
M75 ; Start Print Timer and Engage Fil Sensor if USB Printing
M117…
-
### What issue do you have? Please be as thorough and explicit as possible.
I just installed the plugin and had my 2 heaters load automatically, but the plugin loggin was constantly throwing warnings…
-
With the Knomi 2, if the ambient room temp is for example 19 degrees C and you swipe to the preheat screen and press the button to preheat the bed, then press the check button while the setting is abo…
-
### System Health details
Version: core-2024.3.1
Python-Version: 3.12.2
OSVersion: 6.1.73-haos-raspi
### Checklist
- [ ] I have enabled debug logging for my installation.
- [X] I have filled out …
-
Hi guys,
I recently added some conditional gcode to my start gcode, and it is breaking cura's ability to populate these temp variables.
Here is my complete start gcode block:
```
;///////…
CCS86 updated
4 years ago
-
After updtating to Version: 2024.4 the SVT crashes with the following logging
2024-02-20 10:39:03.245 Error: Thermostaat Serre: Error calling 'http://192.168.1.101:80/json.htm?type=command¶m…
-
It would be nice if the core temperature could be used as an input, or really for that matter the output of any shell script/command. At the very least it would be convenient to have this information …