-
As we've noticed, calling out to COHD via API can be very, very slow. I reached out to Casey Ta, and he graciously sent me a dump of their entire database! It can be accessed [here](https://u.pcloud.l…
-
### Bug Description
Nozzle to probe offset is ignored. Probably on X and Y axis.
### Configuration Files
Not relevant
### Steps to Reproduce
Compile latest 04c4c6004e752582235357b14aebd…
-
Is this Wi-Fi Dimmer supported?
https://www.aliexpress.com/item/Wifi-Smart-Dimmer-220V-240V-150W-Controller-Timer-Switch-light-Voice-Control-Works-With-Amazon-Alexa/32962631174.html?spm=a2g0s.90423…
-
BLTouch is not centering to the build plate on z_safe_home. The position it homes to is center of build plate + the nozzle offsets. This results in the printer head homing to the front left corner of …
-
The specific use case I'm thinking of here is people doing a "Build everything from NAND or NOR like in the nand2tetris course", who would like to use their own gates rather than the built-ins, but wo…
-
Normal forward extruder moves are being interrupted, or something :smiley:, particularly the first move or two after a retract -- including the corresponding unretract move. Seems to be a conflict be…
-
Hi,
are there plans to implement Regenerative Breaking? (Copter/Main?)
I think its usefull especially for large ESCs (eg. K-Force 120A v2 HV, i use this in my E-Bike)
It could also be usefull for C…
-
For the next release of the MagnetoShield:
- The voltage sensing voltage divider is on the high side on the R2, thus can only sense supply voltage. This should be moved to the low side of the elect…
-
**Describe Your Problem:**
I install home bridge step by step for a guide but myservername.local:8080not work could you tell me why?
**Logs:**
```
date | stream | content
-- | -- | --
…
-
i tried to Print Multi Coulor (E.G White Black Blue) Throu Singelnozzle Diamond Head. Butttt... My Firm is Changing different Temperature and all everything it have to do to Print other extruder but t…