-
As a preparation to ad spindle sync to the ESP32 and SAMD21, I tested grblHAL on a STM32F411 nucleo board. To get it working, I basically only had to change the nopullup on the encoder pin to pullup, …
-
Case in point, [this specific change](https://github.com/MarlinFirmware/Marlin/commit/d43cc2dd5f52c9b71b486e7778d7fb44ea67fad6#diff-744b3dbd56ea076f353b4ed94eb96271L125). Also the recent change to the…
-
which distros can we support on python3?
which dependencies are required(boost, bindings, gtk, tk)?
please test what you are using:
`./configure --with-python=python3 --with-boost-python=boost_pyth…
-
**Modpack version**
1.77, non-expert
**Issue**
Metal duplication involving Advanced Rocketry rods
Advanced rocketry rods gives you 108mB (3/4 ingot) when melted in smeltery, but you get 2 rods…
-
Latest Master branch build. T41U5XBB_map.h with
`#define Y_GANGED 1
`
Ethernet enabled in my_machine.h. Everything else is default.
When running any GCode program, all motion will stop …
-
### Translate
![DragNDrop](https://user-images.githubusercontent.com/34275205/98848447-071a1480-2452-11eb-8af8-2f946cd3f39f.png)
_Drag'n'Drop_
![TranslateWidget](https://user-images.githubuserc…
-
LinuxCnc 2.9
ProbeBasic - development
Any changes in the tool table leads to the following error: linuxcnc cann't "see" all tools anymore. If I try to use for example "T1 M6" command then I recei…
-
the word lists are different from wordle.
if helpful, here's the wordle list:
```
valid_guesses = ["aahed","aalii","aargh","aarti","abaca","abaci","abacs","abaft","abaka","abamp","aband","abash",…
-
On ubuntu 20.04, Julia 1.6.2, I get the following error
WARNING: could not import DoubleFloats.Double64 into HomotopyContinuation
ERROR: LoadError: LoadError: UndefVarError: Double64 not defined
…
-
Early days in debugging/proving my set-up but I can consistently reproduce this error...
Running a GCode file or macro (as generated by the turning or threading macro tabs in IoSender...) if the fi…