-
I built an installer for the latest changes with shortnames (0.4.0) so I could test it out in Windows machines. This is what happens when running the relay via python in GitBash.
```
$ python ma…
-
### Category
Other
### Hardware
T-Beam
### Firmware Version
2.2.10.7cebd79
### Description
I have a Tbeam T22_V1.1 / 20210222.
After aquiring a gps coordinate, it will not chan…
-
```
File "python/meshtastic/mesh_interface.py", line 164, in showNodes
"AKA": user["shortName"],
KeyError: 'shortName'
```
-
There are a couple of issues with remote_hardware module configuration :-
1: local get/set fails
```
$ meshtastic --set remote_hardware.enabled true
Connected to radio
Set remote_hardware.enab…
-
Looks like we may have turned down the GPS interrogation too much, I am consistently getting No GPS Module on my tbeam with 1.3.37
This is all I see for GPS in the serial logs when doing a reset
…
-
https://meshtastic.org/docs/software/python/python-installation
404
-
Meshtastic-python local examples work fine and connect to the heltec-v2.0 433 mhz board (configured as ham)
### Meshtastic-python/examples# python info_example.py
firmware_version:1.3.0.c97541…
-
```
(venv) meshtastic-python % meshtastic --dest '!remote_id' --info
Connected to radio
Requesting channel 0 info from remote node (this could take a while)
Requesting channel 1 info from remo…
-
### Category
Serial
### Hardware
Heltec v2
### Firmware Version
2.1.9
### Description
1. Connect via USB
2. Use the CLI client `2.1.6`
3. Send any command, e. g. `meshtastic.exe…
-
Sending text with an apostrophe displays as an upside down question mark on the device. It displays fine in the app. Sending from Meshtastic Python works. 1.2.50