-
### Describe the bug
My HGLRC XJB F428 FC showing no GYRO after firmware updating to 4.3.
even downgrade the firmware to 4.1.1 which it came with still not working
I have two of them. one is defect…
-
Hello, I'm trying to create stubs from my Pico Lipo board (a clone of Raspberry Pi Pico, with added functionality) because I want support for auto-completion of libraries like `picographics` that are …
-
I am trying to build a bi-copter using omnibus f4 pro FC with inav configurator.
Since Inav don't have direct support for bi-copter I found some info on the [Issue #6013](https://github.com/iNavFlig…
-
It could be I just couldn't find it, but max throttle seems gone from the GUI.
You can of course fix it by setting max_throttle=2000 in the CLI.
This is just annoying since the default is 1850 v…
-
Please add support for MPU-6050 gyroscope series
-
Is it possible that this is an unidentified IMU?
The silkscreen says "MPU-9250/6500/9255"
```
[ERR] Found unknown I2C device on address 0x68 with possible id's:
Reg: 0x75 Value:0x74
Reg: 0x00…
-
### Describe the bug
after flashing bf 4.4.0 rc3 when on configuration page gyro is not detected.
### To Reproduce
flash bf to crazybeef4fr with BMI270 gyro, apply custom defaults, connect, go to c…
-
### Describe the bug
Acro trainer option is missing in 4.4. From what I can see `#define USE_ACRO_TRAINER` can no longer be found in source
### To Reproduce
Go to modes and look for acro trainer ev…
-
Hi Wolfgang Ewald,
Noticed an unexpected behaviour inside the
```
if(!myMPU9250.init()){
Serial.println("MPU9250 does not respond");
}
else{
Serial.println("MPU9250 is connected");…
-
First of all thanks to the author.
I would like to know is this lib support multiple MPU6500 using SPI?
I have an ESP32 board and more than 6 MPU6500 sensors. I try to connect them together and …