-
Disclaimer: this is not an issue or bug, but a question.
I'm developing a dual-mode device which registers on PC as both MIDI and CDC interface (virtual COM port). I'm using CDC interface for OLA v…
-
We've just identified an issue when an sACN Node is directly connected to our transmitter.
In https://github.com/Hundemeier/sacn/blob/042968632deb914ed98b310762852778ace9994c/sacn/sending/sender_so…
-
--------- Instructions --------
Please provide answers directly below each section.
--------- Instructions ---------
**ESPixelStick Firmware Version**
4.0-ci8301555430
**Hardware Version**
…
-
Hi,
With a single output running x4, operation is as expected with smooth pixel output, however when all 8 outputs are being utilised x4, the output is stuttery and updates a few times a second. When…
-
Hello.
I use an APC mini midi controller and avoltes titanium ONE using MIDImonster.
Communication works fine for me, the only problem I have is that avolites doesn't send me feedback if the cue i…
-
Hey,
i use your Library with a Arduino nano.
When i use Version 5.0.0 i have 120byts of free memory.
When i use Version 6.0.0 i have -24 and a lot of errors
The code did not change
```
/*…
-
Please see full details here: https://github.com/Aircoookie/WLED/issues/4141
I posted first in WLED thinking the issue was there since this works perfectly on my F16v4
![image](https://github.com/…
-
--------- Instructions --------
Please provide answers directly below each section.
--------- Instructions ---------
**ESPixelStick Firmware Version**
3.2
**Hardware Version**
**Binary r…
-
I am looking for a solution to switch on/off using the shortcut command T=2 with hardware buttons for a LED matrix, if the data is coming via Artnet. At the moment all hardware button commands are ig…
-
### What happened?
Using WLED in sACN muticast mode works but it is really slow, many packets are probably dropped so the control is no smooth. If switched to unicast mode the control is fine and smo…