-
Many STM32 devices with "generic" CAN2.0 peripheral are currently supported via the bxcan library. The ones listed in the title have a different peripheral. Additionaly the H7 is a bit different flavo…
blaa updated
8 months ago
-
1. Bringup support for the camera driver to a point where it's feature set matches the STM32.
2. Add full DMA offload using the eDMA engine so it matches the STM32 performance. One customer report sh…
-
**Feature Request: Solution video to unbrick the Portenta Orange LED of Hell**
P.S. **I don't see the Orange LED as bad, I see it as a kind of fuse that protects the Portenta from bad connections…
-
Information:
Board: STM32H747i_DISCOVERY
Zephyr version: 3.5.99
Zephyr SDK version: 0.16.5
Commit: https://github.com/zephyrproject-rtos/zephyr/commit/023d4838fbb8513f9d9ff6f26b0…
-
Dear @skjafar
thanks again for your great project and all this work around this great board PortentaH7.
I have been able to connect the STLINK-V3MINIE to the Breakout-board and flash from STM32Cu…
-
just found this article on aliexpress:
https://www.aliexpress.com/item/1005005919904877.html
which is more or less a quite bare breakout for a STM32H723ZGT6
i.e. the 144 pin variant of H7 ... load…
-
**I am using Zephyr 3.2.0 in our project and When I am trying to get RTC output at every 10 seconds**,
Sometimes I am getting 1 sec less than expected.(Refer "Result" in the attachment)
**Steps to…
-
**Describe the bug**
I am trying to read 4 adc channels simultaneously with an STM32F411. The adc_read call only allows a single channel to be read with STM32 if not using DMA. This issue has been br…
-
**Caution**
The Issues are strictly limited for the reporting of problem encountered with the software provided in this project.
For any other problem related to the STM32 product, the performance, …
C47D updated
8 months ago
-
Please add board 'Arduino Giga R1 Wifi' to the boards support list:
MCU: STM32H747XIH6, Cortex M7 480mhz
Mucho appreciated.