-
Hello, Thanks a lot for this lib, I really appreciate the fact that every settings are so clear.
I was using TMCstepper lib before with accelstepper and I'am currently trying to migrate my code to yo…
-
Several people (of which I am one) have reported issues with recent Klipper versions and SPI communication with the TMC5160 on the SHT36 Pro. Initially, when I used a mid-September 2023 version of Kli…
-
Tried to use this with LDO 2504AH on Octopus v1.1 with TMC2209(s) and senseless homing doesn't appear to be working even with a value of 255 the X Axis is crashing into the gantry.
I add `2504ah` t…
-
I'm using a variant of the "Stallguard" example to tune the stallguard settings of my TMC 2130 SPI driver (from BigTreeTech), but I am having an SPI issue where the value for drv_status.sg_result retu…
-
I've spent hours working with FLSUN to fix the firmware for my custom QQ-S Pro with an MKS Robin Nano V3.1 and a TS35 V2.0.
I have the Homing fixed except, if I offset any axis by a small amount ma…
-
@thinkyhead, based on our discussions at ERRF, I thought I would open a FR for DC servo/encoder support. I know misan has ideas on how this could be approached.
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I want to configure Marlin Fw without Extruder. Following [Issue #10212]( https://github.com/…
opmtk updated
3 months ago
-
I'm getting the seventeen build errors listed below. Trying to build for a BTT SKR 1.4 Turbo with four TMC2130's. If I comment out the #define TRINAMIC_ENABLE 2130 in my_machine.h it builds just fin…
-
I'm not sure if this is a bug or operator error.
I have tried many combinations of setting up the thermocouple for the E3D V6 hotend on the Bigtreeteck MKR Pro board. I am using the thermocouple ampl…
-
Updating firmware documentation isn't really complete for example:
Do you power off and power on the printer to "reboot the board" do you press the button little red button to "reset", do you hold …