-
Page 30 is about setting backlash.
It could be helpful to mention that you can actually access the 50t to test the backlash. That would never have occured to me when I built my first voron (first p…
-
I was searching why I coudn't use all 120mm travel and found that the strain relief plate (I use the one from the V0-Umbilical mod) collides with the screw hole offset face when homing. I see the sam…
-
it looks like https://github.com/VoronDesign/Voron-Switchwire/blob/master/STL/Gantry/XZ_Axis/%5Ba%5D_upper_idler_support_b_left.stl and https://github.com/VoronDesign/Voron-Switchwire/blob/master/STL/…
-
Hello! I Recently followed, what I believe were your instructions, on the vorondesign.com site, for setting up printer configuration file backups on GitHub. I got all the way through the procedure, …
-
The blue label next to the C extrusion says "C Extrsuion"
-
There are inconsistencies between the sourcing guide https://vorondesign.com/sourcing_guide?model=VS and the BOM available on the https://vorondesign.com/voron_switchwire page
Under the **Misc** …
-
The manual calls for M3x12mm screws here, but when using the Rapido cartridge, those are too short (0-1 Threads engagement), 16mm works great though, so maybe worth mentioning it in the Manual.
![Scr…
-
The link is broken to sensorless homing guide in the Voron documentation website.
Link found on https://docs.vorondesign.com/build/startup/
-Incorrect path https://docs.vorondesign.com/build/star…
-
V0 Docs on docs.vorondesign still document V0.0/1 Z-endstop setup. see https://docs.vorondesign.com/build/startup/#z-endstop-location-v0
-
### Application Version
5.2.1; 5.3.1
### Operating System
Windows 11 x64
### Printer
Voron 2 300mm (I named it "Voron!")
### Reproduction steps
1. Load up any model. I'm using "New latch 6.0mm.…