VoronDesign Voron-Trident issues

VoronDesign / Voron-Trident

Voron Trident CoreXY 3D Printer design

578 stars 172 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Manual page 8 : it shows the 625 bearings while the trident does not have any.

#167 Nimajine opened 1 week ago
0
Update Voron_Trident_Kraken_Config.cfg

#166 mairisskuja closed 3 weeks ago
1
Manual: X carriage lacks two heat inserts

#165 Icenowy opened 3 weeks ago
0
Update Voron_Trident_Kraken_Config.cfg

#164 nemgrea closed 3 weeks ago
0
Line 172 of Kraken config has a typo: sstep_pin: PG11 instead of step_pin: PG11

#163 GreenPlasticWaterCan closed 1 month ago
1
Missing STL part in skirt

#162 oldcarlos opened 1 month ago
3
Why is there no spider motherboard configuration file in the Firmware directory?

#161 tianyi725 closed 2 months ago
1
Double period in RAIL SAFETY

#160 nmattia opened 4 months ago
0
Incorrect HAMMERHEAD NUT description

#159 nmattia opened 4 months ago
0
The A and B idlers are needlessly annoying to assemble

#158 kozross opened 4 months ago
2
Manual should instruct that T-nuts be preloaded prior to frame assembly

#157 kozross opened 4 months ago
1
Voron Trident Kraken Config

#155 Dr-Info closed 4 months ago
0
Issue with extruder. It freezes up when printer is powered and won't work when activated

#154 HeATThER closed 5 months ago
2
List of all 3d-parts and their usage?

#153 calmarc opened 5 months ago
0
Suggestion: page 177 - in what direction to rotate

#152 calmarc opened 5 months ago
0
suggestion: page 226 - zip-tie 3d-print not mentioned

#151 calmarc opened 5 months ago
0
RPi 5 active cooler does not fit with raspberrypi_bracket.stl

#150 slashbeast opened 5 months ago
0
[Manual] Clarification bolting x-axis to y-rail, and inconsistency in "end stop" terminology

#149 dekay opened 5 months ago
0
[BUGFIX] Use Z_TILT_ADJUST for bed leveling in G32 macro

#148 mjonuschat closed 6 months ago
0
No puedo hacer funcionar mi impresora me marca error moonraker y no se programar

#147 Rominadesign closed 5 months ago
1
Wrong extrusion suggested as spacer on page 17

#146 rafal-molotkiewicz closed 4 months ago
1
Update Trident_Assembly.f3d

#145 hartk1213 closed 6 months ago
0
Cad assembly fix

#144 hartk1213 closed 6 months ago
0
updated CAD assembly for trident

#143 hartk1213 closed 6 months ago
1
Revert "updated XY joint STLs to use hole bridging"

#142 hartk1213 closed 7 months ago
0
updated XY joint STLs to use hole bridging

#141 tanaes closed 7 months ago
2
Subreddit mentioned on page 287

#140 Gamithon closed 4 months ago
0
Manual: Page 100

#139 webRat closed 7 months ago
1
Typo on Trident Manual Page 4

#138 shaunmorris opened 8 months ago
0
octopus pro 1.1 config changes

#137 shiftingtech closed 8 months ago
0
Remove [SAVE|RESTORE]_GCODE_STATE from PRINT_END macro

#136 voidtrance closed 7 months ago
5
Manual text colour hard to read

#135 KodiTheDog opened 8 months ago
1
Manual: controller board wrong link pg203

#134 atoomnetmarc opened 8 months ago
0
Manual: 300mm bed frame spacing.

#133 atoomnetmarc closed 4 months ago
1
Trident Manuel still has Afterburner parts and instructions in the X Axis section

#132 Deadbob1978 opened 9 months ago
0
Update CI node to 16.

#131 KiloQubit closed 9 months ago
0
Update config files to reflect SSR rating instead of the old, incorrect "warp" rating.

#130 StevensStuff closed 9 months ago
0
Manual: VHB on panel clips not depicted

#129 cromine11 opened 10 months ago
0
X chain fix

#128 hartk1213 closed 9 months ago
0
Manual: Jumper remove/install ordering suggestion

#127 MallocArray opened 10 months ago
0
Manual: Page 142 does not mention washer for thermal fuse

#126 Juniormunk opened 10 months ago
4
Sensorless config

#125 cmdtbalbosa closed 11 months ago
1
stealthburner integration

#124 nemgrea closed 11 months ago
0
Update Voron_Trident_SKR14_EXPMOT.cfg

#123 shiftingtech closed 1 year ago
0
Update CI dependencies.

#122 KiloQubit closed 1 year ago
0
Manual: Page 217 does not mention roll-in T-nuts

#121 MallocArray closed 10 months ago
1
Thumb bolt/ Knurled nut wrong size in manual?

#120 Faenum closed 4 months ago
5
Wiring PE to frame does nothing.

#119 cmdremily opened 1 year ago
2
Is Bambulabs Carbon-X1 violating VoronDesign Trident's GPL license?

#118 Kreyren closed 1 year ago
1
Trident r1 "power_inlet_filtered" bug/fault

#117 Exerqtor closed 1 year ago
1