-
Hi all, I am new with the Sonoff devices. I have a Sonoff Basic and I' ve flashed in it the Tasmota firmware following these configurations:
/*
user_config.h - user specific configuration for So…
-
Hi, I was wondering if it could be possible to support H801 devices like arilux lc0x. Tasmota supports these devices in addition to Sonoffs.
Ps. Thanks a ton for this highly useful tool. I've use…
-
Hello,
after flashing to 6.1.1 I experience the following issue on a sonoff TH:
With the mqtt topic set to "sonoff-x" or "sonoff-18" get a correct SENSOR message:
**19:02:14 MQT: tele/sonoff-…
-
Was able to control LC11 with remote before flashing Arilux_AL-LC0X, besides this remote interferes with other RF LED controller, so it sends something.
But no reaction on pressing remote button w…
-
in the new version , compiling on raspberry pi have a lot problems
```
Scanning dependencies of target lua
[ 1%] Building C object lua/src/CMakeFiles/lua.dir/lauxlib.c.o
[ 2%] Building C object …
-
Originally reported by: **ferbulous (Bitbucket: [ferbulous](https://bitbucket.org/ferbulous), GitHub: [ferbulous](https://github.com/ferbulous))**
----------------------------------------
Hi, not ex…
-
Saw Tasmota has support for the H801 LED strip. These strips are quite similar but cheaper and smaller esp8266 modules. http://www.banggood.com/search/arilux-rgb.html
 to TX (FTDI), TX (Arilu…
-
**Not a Tasmota Issue!**
Please could someone advise me on where to look to fix the below error? I have scoured the web and cant find an answer. pycurl is installed, and the upload works once afte…