-
I ran into the receive/sent freeze and found that it should be fixed in rev. 2.5.1
I have the 2.5.1 installed but it still hangs when I switch from Rx to Tx Mode
I had a running receiver and added t…
-
### Describe the bug.
**Device Information:**
Firmware: MNTM-007 03-09-2024
Model: FZ.1
SD Card Format: FAT32
**Sub-GHz Settings:**
Module: Internal (Bug doesn't occur with external antenna)…
-
Hello,
I have used Bruce already for a long time and would like you to suggest some improvements.
1. Improve SubGhz - make the signal better and try to make it compatible with Flipper to transmi…
-
This might help?
https://github.com/h-RAT/EvilCrowRF_Custom_Firmware_CC1101_FlipperZero
-
please add irda and cc1101 on 443MHz
this will be a swiss knife for transmit, receive and data transfer modem. Meybe add 4-16 keys for send data directly from device
-
Currently we are using Johanson Tech. 0915BM15A0001E integrated balun and filter (Center freq 915MHz). The required center frequency is 790MHz.
-
Hi,
Would it be difficult to port MBUS as well ?
I haven't looked too much yet as my C/C++/CC1101 skills are very poor :-)
-
### Current Situation
1) Using ESP32 and CC1101
2) Building example OOK_Receiver. Set OOK_MODULATION to false
3) Can't receive proper FSK signal
4) Also, the pulse_data freq parameters are not dis…
habub updated
8 months ago
-
Hello! I am excited by this project, it is very cool. Thank you for making it!
I live in a region where 868MHz is not allowed but 915MHz is OK (US). So I acquired some Chroma74 (and other Chroma) …
-
Hi
Brute force is available?
Or available as soon?