-
**Describe the problem you have/What new integration you would like**
pipsoloar component reads just 1st MPPT for inverters having 2 MPPT
**Please describe your use case for this integration…
-
I've just installed the ovms module in my fiat 500e (2015).
I can see the soc and lock doors etc.
But when i charge the car (granny charger) it is not detected by ovms.
Not charging
SOC: 64.0%
…
-
This is an issue to start discussion about IPFS on mobile, which is a clear need for IPFS to succeed in the long term.
Mobile devices are particularly difficult as full nodes within a DHT or in shari…
-
I'm currently using a USB device connected to my Android device through an OTG cable. However, when I plug USB-C into the PD port on the OTG cable, the USB device is not detected by USB Manager. Do yo…
-
Hello and welcome.
I have a BMS as in the topic and it works with seplos ver2.0, but not everything is decoded correctly. Send data:
~25014642E00201FD30
answer:
~25014F4280800001 0E 0DD2 0DD2 0DD3…
-
Built a window sensor, everything worked well, started thinking about a v2. Here is what I came up with, take it or leave it.
## Changes
1. Adds a `TP4056` (USB-C here, could also be Micro USB) f…
-
### Description of the feature
### Illustrations
- Device: Kagura
- Channel: Devel
- Build: 2020-09-12
### Steps to reproduce
* Plug phone into charger
### Ex…
-
Hi,
I am using the Arduino MKR NB1500 to connect to the AWS IoT.
My current issue is the MQTT won't connect to AWS if the USB serial port is not recognized by my computer.
Scenarios as below.
…
-
Hi!
I have a feature request.
I have several devices connected via CANBUS to victron cerbo. Some of them are not directly compatible with victron but read CAN BUS info provided. In my case 2 alt…
-
This project is awesome! I love using ESPhome for everything and am considering trying to adapt this to work with the BYD HV battery protocol + Tesla model 3 battery protocol.
They are both CAN ba…