-
```
Hi,
he can include other swash type. I have a h4 swash type and I could not control
the servos.
Best regards
Alberto
```
Original issue reported on code.google.com by `alb_pag...@yahoo.it` on 3 …
-
```
A suggestion was made to add differential servo trim to the climber. This
would allow the servos to be at a slightly different position, to "tip" the
hook assembly left or right, if it's not li…
-
```
A suggestion was made to add differential servo trim to the climber. This
would allow the servos to be at a slightly different position, to "tip" the
hook assembly left or right, if it's not li…
-
- Move Servos to Teensy, adjust power delivery for servos
- Remove Auto pHat
- Fix ROS2 nodes to point to teensy as appropriate
-
Guys this is a very nice development. We are working on a humanoid which uses small but torque 40kgcm servos Savox 1270TG.
We wanted to use your board to control it via CAN with current-based torque …
-
I connected my original Ps4 controller and i tried to control 2 servos with joystics but nothing happened. Then i wanted to check if everything works correct. I upload the PS4ReceiveData program to my…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
audio check is ok. audio out is loud and clear. mic is very low even input device set on 150% (maximum).
when using tts.say (imported from aiy.voice) audio is horrible. very high background noise (so…
-
```
What steps will reproduce the problem?
1. Use NanoWii (Atmega32u4) in tricopter mode
What is the expected output? What do you see instead?
Right after I plug in the battery the servo goes crazy a…
-
```
What steps will reproduce the problem?
1. Use NanoWii (Atmega32u4) in tricopter mode
What is the expected output? What do you see instead?
Right after I plug in the battery the servo goes crazy a…