-
https://github.com/quinnfield/quinnfield.github.io/blob/master/dobot/style.css#L31
You can use the :not(:last-child) selector to make this more maintainable. What happens when more shop items get a…
-
https://github.com/Alo-o/Alo-o.github.io/blob/master/dobot/index.html#L13
Use an `` tag here
-
-
![image](https://cloud.githubusercontent.com/assets/5173183/19560952/8cdff924-96ce-11e6-81db-3e87ee9a35fa.png)
In order to get further information about a particular meetup, I _could_ just click on t…
-
You are adding the reset to the project, but not including it in your html
https://github.com/quinnfield/quinnfield.github.io/blob/master/dobot/index.html#L9
it should be linked before `style.css` to…
-
Suwat wrote:
> Hi max,
>
> I'm trying calibrate base axis with following commad
>
> driver.CalibrateJoint(1, driver.freqToCmdVal(400), driver.freqToCmdVal(50), 1, 5, 1, 1)
>
> all steps are per…
-
Hey there,
As a newbie when it comes to embedded system, I've appreciated reading your criticisms of the stock dobot offerings. I'm wondering if your comments and comparisons are still as valid with t…
-
took them from dobots website, not sure if there should be changes
-
Hi,
I was wondering how you have connected each of the GY-521 SDA and SCL pins to the same pin 20 and 21 on the RAMPS board using jumper wires - are you using a breadboard?
Also, are you using a sepa…
ghost updated
8 years ago
-
In most example scripts, the dobot is expected to be at /dev/tty.usbmodem1421.
At least in Linux, it's straight forward to create a udev-rule so that the dobot (in fact all Arduino Megas)
will be fo…