-
I am trying to read a autotelemetry with an arduino.
I was expecting a record lenght of 10 bytes:
1 byte temperature, 2 bytes Voltage,2 bytes Amps, 2 bytes Amps hour , 2bytes eRPM, 1 byte CRC
But…
-
Hi, I am an RC boat fan, so I do not own any flight controller. I need BlueJay to solve a motor shuttering issue and need its music editor feature as it is for my kid
I have successfully updated my…
oeloo updated
1 month ago
-
### Describe the bug
Changed my GPS to MSP and now it will not change to anything else and device shows as rebooting on the GUI and will not reconnect. unplugging the usb to reconnect then shows that…
-
**Describe the bug**
Issue with VGOODRCF4 (or maybe unreleased VGOODRCF405_DJI)
@Diversionpfe commented on orignal PR #410:
>
> Accept my apologies if this is not the right place to post this is…
-
The test found that the ESC could not drive the motor when the ESC protocol was modified to PWM
-
Hi, I build firmware for rp2040 with make raspberrypi_pico_default - it's OK. I convert .elf file to .uf2 with elf2uf2 tool.
Then, I take pi pico board, connect to this board module G-91 with MPU925…
-
The "Dumped" or active braking mode on BLHeli32 can burn the ESC if it is connected to a source which has a high internal impedance or can't handle regenerative currents.
During my testing, ESC (Wr…
-
### Is your feature request related to a problem? Please describe
BF is too hard to navigate using the 'project' tool windows in CLion, Eclipse and other IDEs where the source directory is presented …
-
## About
This issue aims to keep track of the discussion on the features / improvements we would like to include in the release after v1.14. Original discussion was held on [May 30th during maintaine…
-
### Describe the bug
I recently migrated from Betaflight 4.3 to 4.5 and flashed version 4.5.1 onto my Bardwell F4 V2 (CLRACINGF4) flight controller. However, I noticed that the onboard Blackbox flash…