-
Any idea how to fix it?
Here's error messages:
Arduino: 1.8.19 (Mac OS X), Board: "Arduino Mega or Mega 2560, ATmega1280"
/Users/tritone/Documents/Arduino/muxlicer/functions.ino: In function 'v…
-
So after some research, I found how to set the 328p fuse to use the internal clock in case you want to repurpose an Arduino with a suitable chip like a lilypad, or nano or something similar. You need …
-
# **Working with an ATmega4809**
https://github.com/gotnull/Solder-Reflow-Plate/blob/main/Board%20Versions/70mm%20by%2050mm%20Ver3.0%20ATmega4809/Software/SW1.0_HW3.0_70by50mm.ino
**To Prepare**…
-
Trying to build flashrom v1.1 on CentOS 7 for ppc64le fails like this (note that x86_64 works):
```
cc -MMD -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param…
-
Right now is rather confusing the SPI access/control over both EEPROMs (M25P128), mostly because we have 2 masters in this bus, which is an unusual case for SPI architectures.
We use two 2:1 multiple…
-
Hey, how dificulte would it be to port the programmer to raspberry pi pico?
-
While running Linux on a [Glavey TM800A550L tablet](https://www.aliexpress.com/item/32837708061.html) I noticed that it hangs at boot, sometimes showing various color patterns on the display, suggesti…
-
So iwas trying to flash my ginko65 with the hex files that is available on the QMK configurator and at first the keys were messed up so I reset and now tried another hex file and now my keyboard wont …
-
Hello,
I am running a Cisco 3745 12.4(25d) in a GNS 3 topology. Inserting a single NM-16ESW works fine, but adding another one in slot 2 breaks the IP layer setup in my administration VLAN interfa…
-
https://notabug.org/libreboot/libreboot/issues/714 has some relevant info