-
- Rastrear versões de bibliotecas aqui e suas modificações.
- Escolher uma versão do Arduino IDE e as otimizações.
- Criar pasta "libraries" no raiz do repositório
-
### Describe the problem
I have a dual boot system with windows 10 and windows 11.
In windows 10 I have no problem, but in windows 11, the "Uploading" process:
 it has been concluded that enabling 1-Wire protocol in the Raspberry Pi Configuration window, a…
-
I am using an ATtiny85 to emulate DS2502.
It works fine with OWFS on Raspberry Pi
…
-
esp32 seems to need some sort of workaround due to dualcore things.
i noticed a fork of your lib here
https://github.com/stickbreaker/OneWire
that "just work" with esp32
i know that the user h…
-
Hi,
I managed the ESP8266 example from one of the videos to work but now I need to insert it in my main code. Since I'm not very much into coding I need some help. This is the OTA example:
```
#i…
-
Здравствуйте, на arduino nano при 2х контактном подключении, показывает 10.63 температуру (температура меняется только на ошибку), при обычном подключении 3.00 градусов и меняется при нагреве.
При …
-
Hi, I ve a question. Which Dallas OW-Sensors are supported? Only DS18B20 or others like DS2438 with p.e. additional humidity-sensor too? Or, is it possible to use the sensors offered here: https://www…
-
* [x] Power supply ICSP
* [x] Power supply USB
* [x] Power supply 12V
* [x] Led Vin
* [x] Led 3.3v
* [x] Upload firmware
* [x] Led Blink
* [x] USB detection
* [x] RX Led
* [x] TX Led
* [ ] L…