-
Hi,
I bought a NanoCUL a few months back to be able to control my Evohome from Domoticz.
Have been able to discover all valve, but I'm not able to set the controller mode (normal, economy, off, …
-
Hello @pvizeli
After the latest release [#9](https://github.com/home-assistant/audio/releases/tag/9) audio on my host system stopped working. Looks like hassio audio locked it...
Wben I run `aplay`…
-
## What happened: Device is not supported
## What did you expect to happen: Expected to follow the procedure to add the device and review debug level logs - logs are empty. wireshark output included …
-
### Describe the bug.
Since v0.22.3 if the main zone (in my case "Woonkamer") is heating, it shows all other zones also as heating, while this is not the case.
![A33DD3DA-35D1-4DD1-BD66-569A5A40…
-
With OpenTherm protocol v3.0 support was added for Ventilation/Heat Recovery and Solar Boiler units, but the OpenThermGateway binding currently only supports Central Heating Boiler and Thermost units.…
-
My tasmota devices are setup with MQTT using a hostname ("homeassistant"). The IP address of my MQTT broker has changed because of a router change. Tasmota devices are still connecting to the old IP a…
-
### The problem
While following the the instructions at https://www.home-assistant.io/integrations/steamist/, Home Assistant returns "Failed to connect" error in the UI after submitting my steamist…
-
Hi everyone , I have installed 9 of these Eurotronic Spirit TRV on my radiators - controlled by home assistant. All looks good from the automation stand point, with the TRV's changing their target t…
-
**Describe the bug**
climate.anna isnt loading due to error about unknown variable
**Evidence**
``` log
2022-03-11 01:39:25 DEBUG (MainThread) [custom_components.plugwise] Plugwise Anna updated
…
Proxx updated
2 years ago
-
### The problem
I am unable to connect to my Netgear XR700 using Home Assistant. I'm a new user and have been unable to get passed the initial setup.
I'm currently running firmware XR700 V1.0.1.48
…