-
Miguel and Sören have been working for a while on an over-the-air calibration technique that may allow us to get away with not having continual calibration setup applied to the XYNC. With a modified …
-
Great work! Absolutely love SDR++
**Feature description**
It would be great to be able to send two different audios to two different sound cards simultaneously.
What I want to achieve is to send …
-
**Describe the bug**
Residium of serialprint into terminal from the testing of BME680 is still present in this version also for the case when debug is not turned on. This may lead into delay for RF g…
-
It is a reality, for various reasons, that similar instruments from different vendors exist in the market. So when we do a lab activity, we often use generic name, eg: oscilloscope and not Tektronix T…
-
Would it be possible to add to Tracker units operating in the 433 frequency a RF beacon function (that broadcasts a tone periodically) to enable tracking using UHF receivers?
This could be used as …
-
Hi @noelpedro,
I have a version of your HDL running on a ZCU102 with an fmcomms2/3 card.
I'm seeing some strange behavior where my correlation results all drop and then re-adjust. This causes t…
-
## Issue Description ##
I am testing the SRSRAN 4G. When I run the UE, the download frequency is 2.68 GHz, while the uplink frequency is 2.56 GHz. I want to see whether the signal is transmitted;…
-
Hi,
When i send readerFieldOn with RCS380 reader, i always got an unexpected modulated signal after 4 or 5ms of carrier is on(according to spy tool, the modulated single is start of communication),…
-
Hello again,
I've been studying your algorithm for interrupt management for quite some time now. I noticed you implemented a small buffer so you could achieve rcswitch compatibility. however, the f…
-
I have been trying to test this chip set with your example OOk_Receiver. I converted the OOK_Receiver.ino to a main.cpp file. I changed the frequency in this file by setting #define RF_MODULE_FREQUE…