-
OH: openHAB 3.0.1
z-wave binding version: 3.0.1
* Device name: Qubino 3-phase power meter
* Device version: ZMNHXD (firmware: 50.6)
* Link to [database](http://opensmarthouse.org/zwavedatabase):…
-
MIRI est une maison connectée avec :
- Onduleur
- smart meter
- Borne de recharge (voiture électrique)
- PAC
- KNX (stores)
- Lave-vaisselle Miele
Dans cette tâche, remontée de donnée vers ThingsBoa…
-
Thank you for this good piece of work!
I've just bought a Plugwise Smile P1 device and they will install a new Smart meter (including a P1 port) in April in my house.
When I look trough the de…
-
## Feature request
I would like to initiate a feature request of implementing just few points for smart RTL (like a copter) on arduplane.
Lets say you are flying at around 300mts over the passa…
-
Hi,
Trying to get MPPT info out of my inverter (SG50RS) - but editing the config.yaml to scan at level 2 doesn't seem to work.
if I check Device MPPT log, I see only Level 1 - as below....
QoS: 0…
-
Only Inverter Daily Generation can be selected in the dashboard confiration page.
Grid consumption and Return to grid are not listed in dashboard configuration.
Smart_meter is set to true
![image]…
-
I have a Sungrow SG40CX-V112 and I am trying to scrape it's data. For now I have data pertaining to the meter it self. On level 3 I get this:
+------------------------------------------------------…
-
Since I installed this service, the flow screen shows 3 phases, even on the AC Loads icon, but my system is single phase. My Fronius Smart Meter is 63A-1, it shows 3 phases unnecessarily, two of them …
-
### Describe your feature request
Huawei also also offers a smart charger (FusionSolar with 7kw or 22kw) and it wouold be fantastic to integrte it as well
### Proper usage
- [X] I confirm that this…
-
Hello, can you share the data set? 1090065253@qq.com