-
Tried to use this with LDO 2504AH on Octopus v1.1 with TMC2209(s) and senseless homing doesn't appear to be working even with a value of 255 the X Axis is crashing into the gantry.
I add `2504ah` t…
-
When trying an SKR3 with TMC5160 drivers I get this on startup:
[MSG:Warning: Could not communicate with stepper driver!]
BTW, the btt_skr_v3.0_map.h file has this typo, could be related:
// …
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Hello
I have a five motors 17HS4401 with TMC2209 on scr 1.4. All motors operate correc…
-
I've spent hours working with FLSUN to fix the firmware for my custom QQ-S Pro with an MKS Robin Nano V3.1 and a TS35 V2.0.
I have the Homing fixed except, if I offset any axis by a small amount ma…
-
I'm getting the seventeen build errors listed below. Trying to build for a BTT SKR 1.4 Turbo with four TMC2130's. If I comment out the #define TRINAMIC_ENABLE 2130 in my_machine.h it builds just fin…
-
@thinkyhead, based on our discussions at ERRF, I thought I would open a FR for DC servo/encoder support. I know misan has ideas on how this could be approached.
-
Hi,
Just installed my new board and drivers with fresh Marlin 2.0.x bug fix based Kay3D cheetah 5.0 firmware on my Ender 5 plus according to Tripod’s Garage YouTube tutorial with the difference being …
-
I'm not sure if this is a bug or operator error.
I have tried many combinations of setting up the thermocouple for the E3D V6 hotend on the Bigtreeteck MKR Pro board. I am using the thermocouple ampl…
-
I just recently got the SKR V1.3 for the wiring simplicity and 32 bit stuff. Sadly, this has also created a few issues. The SPI jumpers are in the correct places and the +5V is in INT like it is suppo…
-
Updating firmware documentation isn't really complete for example:
Do you power off and power on the printer to "reboot the board" do you press the button little red button to "reset", do you hold …