-
Performance (best case: aggregation/AMPDU on):
iperf: TCP 40~50Mbps; UDP 50Mbps
EVM -38dB; MCS0 sensitivity -87dBm; MCS7 -72dBm. (FMCOMMS2 2.4GHz; cable and OTA test)
The best result …
-
Background is here:
https://ez.analog.com/linux-software-drivers/f/q-a/570110/unable-to-build-petalinux-2021-2-for-zynq-adrv9361-z7035-bob-cmos/495320
Adjusting the bbappend like this:
dtb_ta…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
sent
1. Our image is used directly or you build your own image?
your image
2. What is your own modification?
none
3. Vers…
-
While booting with the files provided, I encountered the following error. Can anyone help me with this?
U-Boot 2014.07-dirty (Nov 20 2014 - 17:05:21)
Board: Xilinx Zynq
I2C: ready
DRAM: EC…
-
### Discussed in https://github.com/open-sdr/openwifi/discussions/215
Originally posted by **davidfhorowitz** September 14, 2022
Hello,
I am running your design on a ADI PackRF (ADRV9361-Z…
-
https://github.com/analogdevicesinc/linux/blob/83ce6e3b1894d512c1c41ae0391bad8f46c10343/arch/arm/boot/dts/zynq-zed-adv7511-ad7768.dts#L38
According to [this post](https://ez.analog.com/members/jay_…
-
In the top of the vivado project of ADRV9361-Z7035, there are many gpio interfaces such as gpio_bd, gp_out, gp_in, etc. I found out that these gpio ports are connected to the daughter board (as you sa…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image?
2. What is your own modification?
3. Versions: OS, Vivado, …
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image?
2. What is your own modification?
3. Versions: OS, Vivado, …
-
1. Our image is used directly or you build your own image?
the openwifi release images.
2. What is your own modification?
add rf switch control for antsdr. I can control the rf switch gpi…