-
Both downloads contain the same app - the architecture is x86:
https://public-make-moat-us.s3.us-east-2.amazonaws.com/ankermake/slicer/AnkerMake_Installer_Mac_M1.dmg
https://public-make-moat-us.s3…
-
I do not have a windows system at my house and the Ankermaker Slicer software will not load properly within a Windows VM due to an openGL compatibility issue. Since that is legacy I attempted to insta…
-
AnkerMake slicer now comes with 0.2mm, 0.4mm, 0.6mm, and 0.8mm nozzle profiles. Can these profiles be moved over to here for mor options?
-
New versions of the slicer have been released but this repo still contains a very old version of the slicer. Will updates be coming or should this repo be considered dead? If so please use the github …
-
### Description of the bug
Hallo,
ich komme aus Germany können Sie nicht mal in den Prusa Slicer eine Funktion miteinbauen wo man der Datei STL, die man mit dem Slicer bearbeitet hat dann direkt p…
-
**Describe the bug**
The first level of instructions say you select either docker or git installation and then says you need to follow instructions for the install method you selected.
The Docke…
-
When you create a custom filament profile and save it, there is no way to edit the color unless you edit the C:\Users\AppData\Roaming\AnkerMake Studio Profile\filament file.
See C:\Users\AppData\Ro…
-
Since I download V1.5.21 released .exe file on windows 11, it installed well with admin option.
But no windows appear after run it (also no response with admin option)
The Lapto OS spec is here
-…
-
When printing gcode generated by software other than AnkeMake Studio the print speed is always set to 25% unlike gcode sliced directly in AnkerMake Studio
-
I set a print in Cura to have a speed setting of 50mm/s but when it got imported into AnkerMake it had a speed of well over 300mm/s
The speed estimate in Cura was about 20 hrs but when I changed t…