-
The D878UV, which [appears](http://members.optuszoo.com.au/jason.reilly1/868mods.htm) to be the same hardware can generate an analog APRS message. Is the 868 capable of the same, and/or can the 878 fi…
-
Hi. When pushing a codeplug with analog channels and DCS code, the DCS code is'nt pushed on the radio.
If i configure the DCS directly on the radio, qdmr is able to read them. Pushing the same codepl…
-
In version 0.12.0, APRS settings are neither read from or written to my DMR-6X2 running firmware version 2.10 (the latest).
Reading the radio with a working APRS configuration produces a QDMR code…
-
When I want to write back the data for the device.conf file I get many errors of this type:
```
Zone 5a 'XYZ': channel 65536 not found.
```
Firmware is the newest: 1.15
-
At least the Anytone devices and the Radioddity GD-73 have "Quick SMS" (or called similar) with predefined SMS texts. The content can be configured in the Windows CPS, but not yet in qdmr.
-
I will receive the Retevis RT73 radio sometime this week. What is needed to add support for these?
-
I tried testing RC4 decryption with my anytone on FW ver 3.03 and was unable to decrypt it correctly after entering the same key I entered in the CPS. Is there a key format mismatch or did anytone cha…
-
DTMF contacts are read correctly from the radio, the names are written back, but not the IDs, thus after write the DTMF contacts are not working anymore.
Request: either write back nothing and all…
-
qdmr 0.11.3 mixes up PF1, PF2 and PF3 key functions when reading from and re-writing to Anytone D878IV II Plus with firmware 3.02n.
## Steps to reproduce:
1. Program PF1-3 on device
2. read codep…
-
My rig is a Radioddity RD-5R, running OpenGD77.
My qdmr is from Homebrew, Version 0.11.2
The cable I'm using is "USB programming cable for RD-5R RD-7R DM-1701" purchased from Radioddity.
The lapto…