-
大概每隔几天就会掉线
p3作为zigbee3.0网关接入子设备(比如aqara e系列开关)就算不添加到HA的设备库。仍然会掉线。联系aqara技术支持,说:p3不兼容HA。建议不要使用HA。看到有人M1S网关也会出现掉线,可能HA和aqara的产品确实有不兼容的问题。
-
Hello, I am wondering if it would be possible to add support to the Aqara U100 lock. I've added aqara.lock.acn10 in place of the N100 lock in the utils.py and also in the lock_data.py on my install. …
-
Hi, i have an issue when i try to add my camera to HomeKit : Unable to add accessory. Accessory unreachable
```
streams:
salon:
- rtsp://admin:password@192.168.1.50:554/live1.sdp
- f…
idjul updated
3 months ago
-
I'm trying to make xiaomi cube and xiaomi square button work.
Pub/Sub mechanism is necessary to make these devices work properly
While investigating the way to implement it I've found no subscripti…
-
My multi-mode gateway 2 firmware version is 1.0.6.
I did not find my door lock model in **devices.py**, so I found a similar model with the following code:
# BLE devices can be supported …
-
Hi, I have a stateless switch which i use for a very simple automation (so simple that i kinda forgot why i did it).
accessories involved:
**Master AC Check** -> Stateless switch. Upon turning on,…
-
https://www.aqara.cn/d4_3_overview
Request for support for Aqara Wall Outlet T1 device. thanks
-
### Device model / 设备型号
lumi.sen_ill.mgl01
### Component version / 插件版本
0.7.13
### HA core version / HA版本
2023.10.3
### Integrated mode / 集成方式
Automatic (自动模式)
### The problem / 问题详情
Device s…
-
在 2021 年 9 月 14 日发布的 v1.3.0 版本中,已支持对万能遥控、小爱音箱模拟出的红外设备的接入。如有相关讨论需求,为方便查阅,可集中在此交流。如果有 Bug 等问题,仍可新开 Issue 提出。
### 💡 红外灯泡操作说明
红外灯泡接入后显示如下。
由于红外设备只能单向发射信号,因此不能反馈设备的真实状态。
其中的“闪电”按钮和“划掉的闪电”按钮分别表示“开…
-
I've tried two different accessories and gotten this error for both of them. One was a lamp and the other is a tcl TV.
This is the output after I enter the pin.
/usr/lib/node_modules/homebridge-…