-
Thank you for the work last week with micros() on trying to get the Renesas platform 48 MHz Arduino R4 boards to run the SDI-12 library. When we updated the SDI12 library, the examples would compile …
-
salut a tt
j'ai un arduino uno rev3 et module wifi shield atmeg32uc3a1512
le prb que je conecté les deux carte et téléverser programme arduino wifi web server
rien afficher le ssid dans la liste des…
-
Hi!
I'm a bloody beginner with arduino and programming, so I'm really interested in recommendations in order to learn new stuff.
Thank you so much for providing this library and the examples!
I'd l…
-
I tested the library out on an Arduino Uno R3 (that I borrowed from a friend) using a 47pF capacitor and it does not seem to return the right value. (Returns around 3600 to 3700)
I used the Capacitor…
-
Hello, I was looking for the measurements for the plastic base plate that comes with the Arduino UNO R3 I am using the mounting holes on the plate because it was sturdier than my alternative and was j…
-
I was not able to get any GPS readings. I am using:
CAN-BUS Shield (DEV-13262) and GPS Receiver
EM-506 (GPS-12751) ordered bis SK Pang
Arduino Uno R3
Looking at the hookup guide, it actually see…
-
See https://github.com/KiCad/kicad-footprints/issues/864
-
I use this code and set the pin to UNO R3 SPI
But I still can't read the correct value, can you help me use the UNO R3 test you have on hand?
I am not sure if it is my problem. Thanks
-
I'm looking for sample code for setting a timer interrupt on an Arduino Uno R3.
-
Bonjour,
L'exemple fourni sigfox_uplink sur /armapi me renvoie une erreur d'initialisation LED13 à HIGH.
En affichant l'erreur renvoyée, j'ai un ARM_ERR_ARM_GET_REG.
J'utilise un Arduino Uno et…