sparkfun SparkFun_CAN-Bus_Arduino_Library issues

sparkfun / SparkFun_CAN-Bus_Arduino_Library

Other

154 stars 99 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

problem with Sparkfun_Can_Demo

#22 groumoutisgiorgos opened 1 year ago
0
Leonardo compatible?

#21 truher opened 1 year ago
0
CAN transmission is working, but not the listening part

#20 Ipsitakoley opened 2 years ago
0
Update CAN_Write_Demo.ino

#19 sonu874 opened 2 years ago
0
Message transmission using CAN transmission buffers

#18 sonu874 opened 2 years ago
0
Improve CAN_Read_Demo.ino

#17 visuve opened 2 years ago
0
Add voltage and version ELM calls to the lib

#16 ranknfyle opened 2 years ago
0
1Mbps Speed Supported ?!!!

#15 hicham-vv opened 2 years ago
0
Update to Modern Arduino API Standards

#14 oclyke opened 4 years ago
1
115200 baud

#13 Hlorride opened 4 years ago
0
Fixed incorrect usage of dataString variable

#12 dasfdlinux closed 4 years ago
0
Will this library work with ESP32 native CAN interface?

#11 hondaman900 opened 5 years ago
0
How to run at 1Mb/s?

#10 JunctionRunner opened 5 years ago
0
Does this library support CAN protocol Flow Control?

#9 n1705771 opened 5 years ago
0
SAMD M0 Version

#8 IAmOrion opened 6 years ago
0
feature req - add flea clip and surface mount 120 ohm resistor between CANH and CANL

#7 webmite opened 6 years ago
0
No GPS reading on Arduino Uno R3

#6 sunekaae opened 7 years ago
1
lat and lon number are 10 times too large

#5 sunekaae closed 7 years ago
2
SparkFun_ECU_Demo sketch not logging GPS data.

#4 cmfrancis opened 7 years ago
0
@PlatformIO Library Registry manifest file

#3 ivankravets closed 8 years ago
2
add support for 1 mbps baud rate

#2 davided12 opened 8 years ago
2
Add support for 29 bit identifier

#1 danjo133 opened 8 years ago
6