-
This issue is intended to collect all information related to the need for a new approach to how Zephyr handles the watchdog peripheral in a consistent way across all platforms.
This work was trigge…
-
We - Blues Wireless - make a cellular peripheral that connects with host MCU's ranging from 8-bit MCUs and the 16-bit MSP430, all the way up to Raspberry Pi's. Our developer audience is split roughly…
-
I've been trying to use TCC3 on the SAMD21 in a project, but there is not support for it in Arduino. It looks like Atmel/Microchip added TCC3 in a later silicon revision. Is there any way I could get …
-
I trying to flash on [RoadRunner](https://www.acmesystems.it/roadrunner) with 64MiB n25q512ax3 QSPI Flash. I get strange behavior when address become more then 16MiB. After trying sam-ba with trace le…
ramok updated
4 years ago
-
![DYSON V10 Battery Board](https://user-images.githubusercontent.com/45007610/187153150-9e83f2a4-67ca-4be0-8bba-3eecd075f248.jpg)
Here is a high resolution picture of a dyson v10 batterypack PCB.
…
-
Hi, do you have a sample code for the sender and receiver you show on youtube with rfm95 in sleep mode and CAD mode?
Thanks a lot for this awesome example. 0.9mA receiving consumption is great!!
-
**Provide your feedback**
list output, though formatted, doesn't fit in a standard 80-column terminal
**To Reproduce**
Steps to reproduce the behaviour:
1. Open a terminal with Linux system defa…
-
Prototype, WIP version of this is here: https://github.com/adafruit/circuitpython/compare/master...tannewt:ninja
-
Freely discuss your opinions on an ARM platform for Grbl, moving forward after v1.1.
-
**Describe the bug**
When porting the Atmel SoC's was detected at #68838 that SOC_FAMILY_SAM does not have the vendor as part of the suffix. On the PR was agreed that this could be made after the […