-
Hi Serge,
i've compiled baoclone 1.6 for linux (i use ubuntu 20.04)
i don't understand how set the usb port...
i use for programming the radio a usb to ttl device.
the port it's /tty/USB…
-
**URL**: https://baofeng.fr/Commencer-session?back=history
**Browser / Version**: Firefox 107.0
**Operating System**: Windows 10
**Tested Another Browser**: Yes Other
**Problem type**: Site is …
-
Greetings.
Original Baofeng software allows to define single TS for talking with repeater.
dmrconfig on other hand, don't set specified bit in codeplug until i manually change following line in rd5r…
-
Baofeng UV-9R. Connected via cable to PC USB. Try to connect and get this error.
![image](https://github.com/goldstar611/chirp-appimage/assets/92269165/4b338536-f677-4e80-9d27-be6e4a77d4d1)
I …
-
https://sanbaofengs.com/2018/02/24/trans-truth-equality-and-javascript/
-
Does the hardware support adding 70MHz to 76MHz to the FM broadcast receive function? These systems use FM wide. (works well on Baofeng)
-
Is there a way to use this with my sound card pushing out to a Baofeng rather than by USB?
-
# How to Program Yaesu FT-4X Handheld Radio using CHIRP on Linux – Hefnawi
Prologue Yaesu FT-4X is a very interesting handheld radio that is not very expensive (~ £65) and I believe is a good startin…
-
Hello,
as the E-mail address in commits is probably not working and I was not able to contact repo owner directly, I attach here just a small update for potential additional reverse engineering:
1. …
-
Baofeng UV5R http://puu.sh/87vhj.png
Kenwood tk8180 http://puu.sh/87vkZ.png
motorola tr80 http://puu.sh/87vpd.png
puxing 777 http://puu.sh/87vqD.png