-
![image](https://github.com/user-attachments/assets/4e83230e-be3e-4cf7-ac14-307794597871)
![image](https://github.com/user-attachments/assets/df11303f-5331-4c1a-b18d-5b8acdac6956)
![image](https…
-
Battery A/D
```
long readVcc() {
long result;
// Read 1.1V reference against AVcc
ADMUX = _BV(REFS0) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1);
delay(2); // Wait for Vref to settle
ADCSRA |…
-
Suggestion from John - This will be good data to have while operating the system. With a battery monitoring circuit, we are "halfway there" to a battery recharging circuit.
-
**Describe the bug**
In Monitor Mode with GE REST disabled, predbat attempts to set charge_rate or discharge_rate to 5000 on startup. This behaviour should not occur in Monitor Mode, and it's unclear…
-
I have a 2017 Nissan Leaf with a factory replaced 40 kWh battery. It is throwing a P317E-00 08 EV/HEV HV Battery System EVC-249 code, I believe when ovms stops charging. I have feature #10 (Sufficie…
-
Hello,
i have a problem with crashing with the driver. It runs 3-4 weeks without any problems.
But then it could happen that for a short moment the connection to one of my 4 BMS (JBD)
is lost …
-
### Test Case Title
Battery Temperature Monitoring
### Test Status
Pending
### Test Description
FILL IN
### Test Execution
Manual
### Objective
The goal of this test is to monitor the battery…
-
### Discussed in https://github.com/ffenix113/zigbee_home/discussions/22
Originally posted by **Hedda** February 2, 2024
https://github.com/osaether/nrf_cell_mon
-
Hi there, I got Ancel Battery Monitor in my car. Will this be supported? https://www.anceltech.com/product/detail?id=1243380677060063232
-
Requirements:
1. Shall provide mechanism to monitor battery current
2. Shall be low leakage in off condition