-
**Describe the bug**
Powersave might not be working on BL602
**Firmware:**
- Version [e.g. 1.17]
- Device: Any
- Chip/model: BL602
- Device config:
Power save command on BL602 end here in S…
-
**Describe the bug**
Unable to send constant values to MQTT, values sent are always 0.
Tried with PublishFloat, PublishInt and Publish.
But works with plain numbers. (see screenshot)
Works fine …
-
Hello, bl602-pac contributors:
Bouffalo Lab (bl602 chip vendor) wants to provide an official Rust PAC support project `bl-pac` to include PAC projects for all BL chips. Since there are bl602-pac pr…
-
**Describe the bug**
MAIN ISSUE: I've tried Windows NMAP, Advanced Port Scanner and Angry IP Scanner, targeting port 80 specifically and separately, all ports. This has been done on two different mac…
-
Hi,
after installation new HA 2024, sonoff devices are unavailable from coolkit CK-BL602-SWP1-01(182)
all other devices original sonoff are working well.
thx
[config_entry-sonoff-94546c61063f4…
-
I just received new bulbs from the same seller and same manufacturer, but after opening it I noticed that there's a new chip inside and it's not BL602, since everything else on the module and the powe…
-
When following the readme I can not program the bl602.
`cargo blflash --port /dev/ttyUSB0` ends up in a bunch of `rust-lld: error: undefined symbol: `. I suspect I might not have something installe…
-
**Describe the bug**
Local Time on web page gets crazy after seconds.
On boot, when NTP is synced, time is correct:
But seconds later:
Seconds and minutes increment correctly though time a…
-
Hello world, please add technical specifications and data sheets for BL606 chips please :-)
-
If I'm dumping using `blflash-windows-amd64.exe dump LF686C.bin --initial-baud-rate 115200 --baud-rate 115200 --port COM10` for example, does blflash dump the whole memory? I see BL602 comes with opti…