-
**Describe the bug**
I am getting a stack overflow error when trying to upgrade the firmware. Mine shipped with the oldest firmware.
[22:16:53.433] - Flash load shake hand
[22:18:45.713] - efuse…
-
Flashing using the command `blisp write -c bl70x --reset Pinecilv2_EN.bin` fails.
I ensured my device was authentic and validated its ID before attempting to update.
ChipID redacted in output, but…
-
**Describe the bug**
After flashing by blisp to v2.21 my pinecil v2 looks completely dead.
**To Reproduce**
1. Flash v2.21 (Pinecilv2_EN.bin)
2. iron looks dead, no display on screen
**Expect…
-
I was wondering how to upload a bootup logo to the pinecil v2.
When I use the [update instructions](https://wiki.pine64.org/wiki/Pinecil#Update_Pinecil_V2) from the Pine64 wiki, I end up overwriting …
-
I have BL70X IoT DVK-MB-V1.1, which have BL706 with no internal FLASH or RAM, everything is external.
It have Winbond 25Q32JVS1Q and 1604M-3SQR.
Unfortunately, I can't get this flashed with bflb_…
-
At the moment, custom USB CDC driver is required for flashing BL70X via USB on Windows 7.
It was mentioned in https://github.com/bouffalolab/bl_mcu_sdk/issues/22#issuecomment-1056040870 that Windows …
-
I2S is not working.
[PERIPHERAL_CLOCK_I2S_ENABLE()](https://github.com/bouffalolab/bl_mcu_sdk/blob/master/drivers/lhal/include/bflb_clock.h#L147)
```
#define PERIPHERAL_CLOCK_I2S_ENABLE() …
-
I tested with XT-ZB1 devkit from aliexpress with:
- csky debug server with HLK CK-Link Lite debugger
- csky debug server with Sipeed RV Debugger Plus (ck-link lite firmware)
- RV OpenOCD with Sip…
-
MacBook-Pro-4:Blisp_Linux_x86 markjohn$ sudo ./blisp write -c bl70x --reset Pinecilv2_EN.bin
Password:
./blisp: ./blisp: cannot execute binary file
above copied from terminal. Am I going something …
-
I tried compile and run blisp to update the firmware on my Pinecil. The result is inconsistent.
Firstly, on a freshly installed Raspberry Pi 4B (4GB), I install the latest cmake with snap
```
$ s…