-
Seeing that @ashkitten was having an issue with always booting into recovery (https://github.com/NixOS/mobile-nixos/pull/104), I was reminded of this diagram from the following document: https://sourc…
-
-
Would it be possible to use this to compile a .hex and then upload it to a Printrboard that's running CDC bootloader with something like AVRdude? Or if you have a bit, maybe point me in a direction f…
ghost updated
8 years ago
-
It seems that some of the hints that the bootloaders use are missing
For example:
https://github.com/starkware-libs/cairo-lang/blob/27a157d761ae49b242026bcbe5fca6e60c1e98bd/src/starkware/cairo/boo…
-
It's helpful to have the production bootloader `*.hex` files in the repo, however, what I am missing right now are the corresponding `*.elf` files.
Knowing the addresses of the symbols defined in a…
-
Today we only use grub as bootloader. It might be good to test more bootloaders. For instance:
Linux as bootloader (aka EFI stub)
systemd boot
This could help to uncover issues as by the time L…
-
Upon successful investigation of https://github.com/trezor/trezor-suite/issues/3727 we should consider marking firmwares that are two years old as mandatory. This will help us cleaning up some legacy …
-
this is just what I was looking for!
And it's easy to do on linux
Bootloaders are generated from:
https://github.com/abcminiuser/lufa/tree/master/Bootloaders/HID
and the upload command is genera…
-
The importer currently enables the "cK" button when a serial port is selected. However, the Clicker 2 uses a HID bootloader, so it doesn't appear as a COM port.
The importer should either a) detect…
-
UPDI device chips have different constraints than other series, so keep the following in mind to properly test your bootloader:
- The bootloader reserved area is at the beginning of the flash. The …