-
Hello guys,
We are trying to design our own LED module for the Pixhawk controller. As far as we understand there is a chip on the board that receives information from I2C bus then accordingly contr…
-
Do we need a button that will acknowledge the alarm condition and silence the buzzer?
-
Hi,
Just dowloaded and tested USBqemu-wheel yesterday, and after hours of research, it was the first plugin to actually work and display a list of devices. So, first of all, thank you!
However, …
-
### Description
It would be handier if people know which devices are missing from PCSX2 and people that have or can buy those devices can dump the USB descriptors to then enable the functionality i…
-
Add hardware profile support for 'Anarduino MiniWireless' modules based on RFM22B.
More info can be found here:
http://www.anarduino.com/miniwireless/
This would be setup as hardware type '10', a…
csurf updated
6 years ago
-
## Blogs
- https://github.com/Staok/thoughs-about-hardware-design
- https://www.emoe.xyz/all-about-electronics/
- https://www.analog.com/cn/resources/reference-designs.html
- https://www.envox.eu/…
-
## The Pololu Zumo SBC
This is my current [favorite SBC for simple robotics](http://www.pololu.com/product/2508). It's what was the basis for my Sumo NodeBot at RobotsConf 2014. It doesn't run Node…
-
I've just set this up (modified slightly) on four fan controllers, and had the same buzzer issue mentioned elsewhere, but also am finding that the "RESTORE_DEFAULT_xxx" does not seem to be working pro…
-
Hello. Has anyone run the disc version 2.3? At first I had a problem with uploading any batch, but I managed to do it for a while. now I have trouble starting it. when I connect the power supply, the …
-
To identify each physical devices (e.g., sensors, robots, etc...) in a "device profile" we need an identifier.
Such devices usually don't have MAC or IPv6 address, so GIAI from GS1.
GIAI consists …