-
hi i succefully uploaded the example from your website withe combined readings but i always get an i2c error
.⸮EO⸮v`MM⸮4C8I⸮⸮⸮H(⸮⸮⸮⸮BME280 data to CCS811 for compensation.
Problem with CCS811
I2C…
-
I had an issue with my cjmcu-811 on firmware 1100. It kept throwing the following at startup:
```
setup: Starting CCS811 basic demo
setup: ccs811 lib version: 10
setup: hardware version: 12
s…
-
### The problem
Configured baseline as mentioned in the [docs](https://esphome.io/components/sensor/ccs811.html) is not used or looks like it is not used in the deployed operation.
The start lo…
-
The following are the issues we are having with the ccs811 sensor.
If we are moving a sensor from places where there is a high level of gas to a low level of gas. The sensor is taking a large amoun…
-
### The problem
this product KEYESTUDIO CO2 Sensor Module CCS811 NTC https://wiki.keyestudio.com/KS0457_keyestudio_CCS811_Carbon_Dioxide_Air_Quality_Sensor
have problem with esphome.
the error is
…
-
Hello Pina,
at first thank you very much for AeVOC. Works great and had a lot of fun building it.
However I have to admit I used a 3D Model for FDM printing as a housing.
Now to the topic.
At …
-
Hi,
This plugin is for me not really clear to use. I can choose readings 1, 10 or 60 seconds. But a few lines lower is a ´Data acquistion´. Where i can put also in some seconds. When i add the CCS8…
-
Hi,
I have a very strange behavior on my NodeMCU.
Everything is connected the right way so I2C scanner is seeing both sensors.
My BMP280 is not a SparkFun one. It's a chinese one with address 0x7…
-
I'm testing the OLED Demo now. I have ESP core 2.5.2 and CCS811 lib 1.0.2 and the sensor communication fails after some time. The SDA line remains LOW and therefor blocks I2C buss. The OLED therefor s…
-
I tried to use [the example sketch for getting CO2](https://github.com/arduino-libraries/Arduino_MKRIoTCarrier/blob/master/examples/Sensors/VOC/CO2_Read/CO2_Read.ino) and other parameters.
But wha…