-
Would it be possible to add support for delta printers?
-
### Is your feature request related to a problem? Please describe.
i have a delta printer with a really Warped bed and i don't want to buy a bl-touch ant the manual bed leveling feature says it is in…
-
Just installed the BD sensor and finally got past the calibration stage. I'm hoping this helps out those with delta printers.
I'm running a Tevo Little Monster Delta printer. Homing is via the en…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Are you looking for hardware support?
_No response_
### Describe the feature you want
Hello.
If my cartesian …
-
**Is your feature request related to a problem? Please describe.**
I often print objects taller than the height of the printer head and arm, I would like to print several tall objects in a sequential…
-
After I do a BED_MESH_CALIBRATE on my **delta** printer, the mesh from the bed probe is displayed in the 'Tune' tab as it always is. However, I've found that when displaying the mesh data from a round…
-
It seems that bdsensor does not run properly on delta printers.
After running bdsensor calibrate, run delta calibrate.
There was a case where the nozzle hit the floor even though the bdsensor light…
-
Hello
I am Matteo , student of Automation ad Packaging from Bologna, Italy
I need a help regarding the firmware to a related software to be able to use the robot.
I'm doing a Delta Robot, like the o…
-
### Version
_Version of SuperSlicer used goes here (help->about)_
### Operating system type + version
_What OS are you using, and state any version #s_
### Behavior
* _Describe the problem_
…
-
The provided E4 is for a cartesian printer. Is there a chance of a working example for a Delta type of printer? I have a Tevo Little Monster that I am trying to use the E4 with. I keep having issue…