-
continued from https://github.com/Candas1/Split_Hoverboard_SimpleFOC/issues/4#issuecomment-1604941688
> In the past, I had problems with SimpleFOC due to the limited speed of the encoder readings. …
-
**Have you looked for this feature in other issues and in the docs?**
Yes
**Is your feature request related to a problem? Please describe.**
_A clear and concise description of what the…
-
been trying out various types of solution.
client wifi/telnetser2net(192.168.1.238:23)serial device
**Client side.(windows os)**
create temporary virtual com port(COM8) and point to 192.168.1.…
-
### What is the problem you are trying to solve with this feature?
There is currently no functionality to assign asset numbers to items.
Asset number support would allow for similar items to be …
-
After upgrading mpy from 1.17 to 1.18, my buzzer can't play low frequency sounds any more.
With further test, it shows that the pwm has no output when frequencies < 611Hz.
```python
from machin…
-
### Issue URL (Incorrect Blocking)
[https://www.fluke.com/en-us/product/electrical-testing/digital-multimeters/fluke-87v](https://adguardteam.github.io/AnonymousRedirect/redirect.html?url=https%3A…
-
what issues did you face and how you resolved them?
-
how would one go about adding support for a SAM3X8C based controller?
I have the pin configuration file. I'm just not familiar with 32 bit controllers and don't quite know where to start.
https://gi…
-
Connect M2K. Start Scopy, select the detected device. Press "Connect" button. After the connection is made, select Voltmeter feature. Set the History Button to Off. The Horizontal Voltage Axis resizes…
-
Hi all, I got this up and working back in March. And it has been running great. All of a sudden now, I’m getting the error below. When I run “od -x” on my /dev/ttyUSB0 (rs485 usb connector), it just h…