-
Hi Tom, I recently assembled a DIY radio music kit and everything is great except there seems to be cross talk / interference traveling from the RM to other modules in my system.
I've exhausted al…
-
In fuction PIN_DELAY_SLOW:
```
__STATIC_FORCEINLINE void PIN_DELAY_SLOW (uint32_t delay) {
uint32_t count;
count = delay ;
while (--count);
}
```
the loop is getting optimized out with…
-
### Have you read the HackRF [documentation](https://hackrf.readthedocs.io/en/latest/)?
yes
### What outcome were you hoping for?
The device to function
### What outcome actually happened?…
-
Hi!
Synchronization of time with the GPS receiver conclusion of consecutive data of NMEA.
Prompt what GPS receiver to use and where to connect on the scheme of hours?
ghost updated
4 years ago
-
Hi everybody,
I successfully installed tasmota wifiman firmware on a sonoff mini. It is fully working on my hass.io hub. Then, I repeated exactly the same procedure on other two sonoff mini and they …
-
Digging through the Build Log and I think I know why you can't get the Cirque to work. Sadly its because I suspect you've blown it up.
Cirque input voltage is 3.6V max tolerance per datasheet, no…
-
Hello,
I have a Turing Machine MK2 where the 5th & 6th LEDs (from the left looking at the front panel) do not light when a sequence is running. The 6th on both voltages and pulses does work however. …
-
Hi... this is not an issue at all ;)
but I would like to contact @zpukr to ask a questions regarding the ArduRower project.
Is it possible to run this on an ESP32 without display, I'm asking bec…
-
**Describe the problem you have/What new integration you would like**
Please consider looking at using Sonoff ZBBridge as a WiFi-connected networked Zigbee serial adapter for projects like ZH…
-
Please consider porting ESPurna to the new Sonoff Zigbee Bridge (Sonoff ZBBridge)
- https://www.itead.cc/sonoff-zbbridge.html
Itead has just launched Sonoff ZBBridge as an inexpensive Sonoff Z…
Hedda updated
2 years ago