-
### Problem description
I purchased a device from EBYTE which should convert RS485 registers to Homeassistant.
Registers are read and write with function 03 and 10
Want to use this device to connec…
-
I just created an alternative firmware that is compatible with both nRF51 and nRF52 platforms. It's using the Softdevice S130/S132 2.0.0 from Nordic SDK11.
I already tried it on this modules:
- …
-
I am seeking assistance in the library GitHub to address an issue I'm encountering.
My challenge involves establishing communication between the Ebyte LoRa E220-400M22S and the MCU ATTINY804 IC. Be…
-
@mtx512 Please consider also building + hosting EZSP NCP firmware for E180-ZG120A modules and E180-ZG120B-TB evaluation boards from Ebyte which are EFR32 MG1 based products from China.
Pin definiti…
Hedda updated
4 years ago
-
Any tips on SWD flashing a standard Silabs bootloader FW on Ebyte E180-ZG120B-TB evaluation board and E180-ZG120B module?
* https://www.cnx-software.com/2020/04/27/ebyte-e180-zg120b-tb-zigbee-3-0-e…
Hedda updated
3 years ago
-
Congratulations on the project
Does the it support the new E22-400T**33**S due to increased consumption?
https://www.ebyte.com/en/product-view-news.html?id=454
-
Hi,
I have tried to have direct communication with the development board ab01 and a ebyte e32 with an esp32. I use receive example on cubecell board and transparent transmission in ebyte e32 but it …
-
I have a same issue that previous, but in a different module.
I use a Ebyte e22-900m22s module, that have a LoRa chip llcc68, its seems a semtech 126x.
The data from this devices is [here](https://w…
-
My program has been working and suddenly stopped. The cause is updating ESP32 board manager from 2.017 to 3.0.0 on Arduino IDE 2.32.
Since new ESP32 board manager is based on ESP-IDF v5 and I know a…
-
Originally posted by @JohnConnett in https://github.com/kardia-as/zigpy-zboss/discussions/43 under discussions section https://github.com/kardia-as/zigpy-zboss/discussions
> _**I have an nRF5340 DK…
Hedda updated
2 weeks ago