-
Hello!
In my home I have big HALL with 5x PUSH button switch
I want to use GPIO14 with a 5 PUSH button switch.
I install last version ( Sonoff and ElectroDragon by Theo Arends VERSION // 3.9.21) …
-
Dear Sirs,
I bought 8 LED matrix ( in 3 blocks: 3 + 3 + 2 ) from this supplier:
https://www.electrodragon.com/product/dot-matrix-chain-display-kit-max7219-v2/
Following the documentation, I connect…
-
I have just tested this ready made active adapter board on a Pi3:
http://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/
It works.
I'm using it with 18 64x32 P3 panels
![2…
-
Does anyone else have problems with the web interface?
1. Toggle has never worked (vanilla on std sonoff, custom using elecrtodragon+ds18x20).
2. It's crashed a number of times with the electrodrago…
-
Hello,
I have a chain of 4x 128x64 1/32S panels connected to a Pi3 (Model A+ with 512 Mb) via an Electrodragon Hat.
When I run the -D0 demo everything works fine (altough there is a little flicker…
prosd updated
11 months ago
-
If you've tested it and/or see any mistakes, tell me here.
-
@Staars
Hi Staars, ;-)
found the AM2322 by ali exress:
https://nl.aliexpress.com/item/AM2322-Digital-Temperature-and-Humidity-Sensor-module-Replaced-SHT21-SHT10-SHT11/32698701164.html
He look…
-
The implementation **disables receive features** on ATtiny's due to *"missing libm depencies (udivmodhi4)"*.
I don't know, maybe that requirement has changed in the last few months (new libs? adapt…
-
I am using the HLW8012 Energy meter module, and have used the HLW8012 Basic.ino from this library. However the readings are always zero for all measurements when the load (12W led bulb) is on. Could t…
-
Hello again @hzeller !
I decided to continue my project with other panels than the ones i bought in china.
Im running a the program on 22 32x64 p5 panels with a raspberry 4 with adafruit bonnet wi…