-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Cure depreciated several scripts from: https://github.com/mriscoc/Ender3V2S1/wiki/Calibration-Gu…
-
Hi. I have a Ender 3v2. The cutout in the frame is 40x40mm.This file is 35x40. Can you add 40x40 ?
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
The fan for the motherboard CR 4.2.7 will only turn on when the part cooling fan turns on.
##…
-
### Cura Version
5.7.0
### Operating System
Windows 11
### Printer
Ender 3v2
### Name abnormal settings
default profiles
### Describe model location
center of the buildplate
### Describe yo…
-
I have a bunch of Creality 4.2.2 stm32f103ret6 boards from upgrading ender 3v2's I'm sure I'm not alone, was wondering if its possible to get grblhal on them they seem similar to the blue pill. I foun…
-
Recently installed octo4a on an old lg phone running android 5.1.1 and am unable to connect it to my ender 3v2 with the 4.2.7 motherboard. I have verified that the cables and otg spitter work correctl…
-
### Description of the bug
Slicing a part at .2 layer height, the solid infill layers display odd geometry. Instead of a rectilinear pattern, it's half rectilinear and half concentric, in an alternat…
-
**Application version**
20210516
**Platform**
win 10 64
**Printer**
ender 3v2
**Reproduction steps**
slice with speed active
dis/enable any line type in speed drop down to get back corre…
-
### Cura Version
5.2.1
### Operating System
Windows
### Printer
Creality Ender-3/Ender-3v2
### Name abnormal settings
none
### Describe model location
it's located at the center of the plate
…
-
On OctoPrint 1.9.x and newer, I've noticed that M300 commands created by this plugin are being passed through to the printer's speaker. My printer, the Ender 3v2, does not support different tones of b…