-
Hi,
What have I missed if I get this:
Husqvarna Automower BLE
0.0.9
Unknown Automower
Failed setup, will retry: Data length mismatch. Read 28 bytes of 24
[16:21:00][D][esp32_ble_tracker:27…
-
PROMT
Hello! I very much like the project of radio on esp32. I have such question. Why only ili9163? With other lcd, for example St7735 will be options? Thanks.
-
Hi, not really a problem, but have you been able to use an esp32 to receive the data?
I'm looking for a sensor that monitors the heart rate of a human, that can be placed as far away as possible, a…
-
### The problem
I have a device on ESP-32 (ESP32-D0WD-V3). After installing the firmware via ESP-Home, you can update it once over the air (OTA) and it doesn’t want to update anymore, although it say…
-
Hi,
I stumbled across an (imo) incorrect definition of the `LEAVE` instruction for x86:
https://github.com/NationalSecurityAgency/ghidra/blob/7148590e5c4d917ea4b0add3507c540a54b771d4/Ghidra/Processo…
-
Hi,
Thanks for your work
I tried to make your JetiExBus work on ESP32 but it's not working. Can you tell me what is the Tx/Rx Port ?
According to you code, this is pin 17 for Tx and 16 for Rx. I…
-
I want to transfer data from arduino mega to Esp32 when I use the example sketches ( uart_tx_data on arduino and uart_rx_data on esp32 ) the code generates wrong output ($ovf | ld) . i tried many opti…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Is ESP-32 capable of running RetroBSD? If so, is there a planned port in the future?
-
### The problem
This is the page I am stuck at. No error message, it did manage to connect to it beforehand. I tried pressing the IO and RESET buttons together, the board does reset, but then loads t…