-
Hi, @14yannick!
Thanks for all your hard work - much appreciated. Honestly!
However, being a fresh house owner & HA fan, I struggle with finding solid answers to these 2 questions:
## 1. Upgrad…
-
I have downloaded the repo and instelled Arduino IDE 1.8 with spiffs upload tool. Downloaded the libraries required and build the firmware. Upload the firmware and data folder to the esp32 and apparen…
-
### Hardware
ESP32
### Firmware version
n/a
### Application version
n/a
### What happened? What did you expect to happen?
Failing installing EPSSomfy firmware, I always end up with
`[14:28:06]…
-
## Environment
- Audio development kit: [ESP32-S3-WROOM-1-N16R8（ATK board） and ESP32-S3-WROOM-1U-N8]
- [Required] Module or chip used: [ESP32-S3-WROOM-1 and ESP32-S3-WROOM-1U]
- [Required] …
-
### Target name(s)
ESP32-S3FH4R2 PICO
### Firmware version
ESP32_S3-1.12.1.3.zip
### Was working before? On which version?
_No response_
### Device capabilities
_No response_
### Description
…
-
I have two boards `ESP32-WROOM-32` that I bought following the [link](https://s.click.aliexpress.com/e/_DCzlUiX) from your list of supported boards.
I was not sure which one to chose between `ESP32-W…
drttm updated
4 weeks ago
-
Some are 30-pin, some are 38-pin, and even within those there are narrow and wider widths.
It would be good to have 3 or 4 variants of the PCB that support all of these (with an associated list of …
-
/**
* This example takes a picture every 5s and print its size on serial monitor.
*/
// =============================== SETUP ======================================
// 1. Board setup (Uncomm…
-
Hello! I've a problem with the code. The fact is that I get this kind of images from my camera:
 and the issue is not addressed there.
[ √] I have updated my A…