-
I'm using this board https://www.olimex.com/Products/IoT/MOD-WIFI-ESP8266-DEV/. When I try to run
"sudo ampy --port /dev/ttyUSB0 run test.py" or any other command, it says "Could not enter raw repl".…
-
Please consider this code:
```python
import utime
from umqtt.simple import MQTTClient
mqtt = MQTTClient("test_mqtt_client_id", "test.mosquitto.org",
port=8883, keepalive=30,…
-
error : >>> %Run -c $EDITOR_CONTENT
Traceback (most recent call last):
File "", line 4, in
ImportError: no module named 'trusted_networks'
-
Hello toremick,
I can flash the firmware without error, but when I try to connect with thonny the filesystem seem to be corrupt:
```
The filesystem appears to be corrupted. If you had important d…
-
Would this library work with micropython on ESP8266? - https://docs.micropython.org/en/latest/esp8266/tutorial/intro.html
https://micropython.org/
-
https://github.com/micropython/micropython/tree/master/ports/esp32#configuring-the-wifi-and-using-the-board says:
>The ESP32 port is designed to be (almost) equivalent to the ESP8266 in terms of th…
-
Hi,
many thanks for your great work creating this solution.
I needed to modify in build_esp8266.sh
from "micropython/esp8266" to "micropython/ports/esp8266"
Now it runs fine on my raspberry pi 3.…
balku updated
5 years ago
-
I am running MicroPython v1.20.0 on 2023-04-26; ESP module with ESP8266
I put the following code in boot.py and nothing in main.py:
```
from debugfun import breakpoint, vars
print("Activating ne…
-
@bobveringa I hope you had an enjoyable break.
I have given some thought to the changes on the `read_allocate` branch. I think, once you've ironed out any issues in your application, these should b…
-
After @MarkR42 explained that the automatic storing of the WiFi-connection parameter can wear-out the flash of the ESP8266 many discussions came up: #2510, #2547, #2564 and http://forum.micropython.or…
puuu updated
2 months ago