-
Wouldn't it be a good idea to add an option that prevents a quadcopter from disarming (falling out of the sky) in case of a failsafe event with sanity checks failed? An option like "land in case of sa…
-
**Describe the bug**
I'm running the BetaFPV AIO V3 board on the BETAFPVF411 release. I'm running my GPS on the hardware UART so that leaves me to run DJI OSD over softserial. The OSD is perfect on 4…
-
We all love flying. that's why we're here, but when you fly hard, you're going to crash hard. Wouldn't it be nice to have just a little something to look forward to when you do.? Maybe even some bragg…
-
I have retrofitted an old F450 frame with a new controller running 4.2 Betaflight. I have made several quad so far but this was the first time I tried interfacing with an old frame, in particular wit…
-
During the winter period I was not flying. Later, I noticed that one of my copters had a bad gyro. Ocassionally on start while stationary, the z-axis was drifting with 15 deg/s and later also x and y …
dgrat updated
4 years ago
-
While investigating some DSHOT errors on the SPRacingH7EXTREME, as noted here (https://github.com/betaflight/betaflight/issues/9886#issuecomment-655085419) I found this.
In this first image you can…
hydra updated
4 years ago
-
FlywooF722Dual target - flash firmware - load defaults - CLI set rssi_channel = 8 - save - let FC reboot - CLI get RSSI_channel --> reads 0 again, does NOT retain its value
[diff.txt](https://githu…
-
About five people have asked me about 'arm dropping' issues with 3.4.
Typically, on quickly dropping throttle to zero, one arm seems to drop in the FPV feed.
In the logs I've seen, the motors …
-
I came across a very strange issue - unfortunately not personally, but I have now heard from two people that the solder joints of the motors get so hot after flashing JESC that the motor wires de-sold…
-
**Describe the bug**
Running the bardwell board and 4in1 esc. Normal settings everything works fine, once enabling the settings for rpm filter, only motors 2 and 3 will spin in the motors tab.
**T…