betaflight bidircfg issues

betaflight / bidircfg

9 stars 15 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

<to be removed>

#43 Christiaan1990 closed 3 years ago
0
Matek F411: BF 4.1 DShot BitBang not working when assigning Pin A08 (LED) to cam control

#40 RipperDrone closed 4 years ago
19
Smart audio broke, on Matek f722mini, with bidir DShot

#39 HrrrPippi closed 4 years ago
2
Make upgrade snippet not change filters

#38 ctzsnooze closed 5 years ago
2
Mamba F7 Bi-dir not working

#37 HrrrPippi closed 5 years ago
3
Add MATEKF411RX to Bidirectional DSHOT and RPM Filter supported target

#36 emski0 closed 5 years ago
4
MAMBAF722 Config Snippets

#35 kc10kevin closed 5 years ago
0
JESC RPM Filter

#34 sniperxnl closed 5 years ago
0
Mamba F722 Mini RMP Filtering Not Working ... Only 2 Motors Spin Up

#33 TheFrisco closed 5 years ago
12
problems with mamba f722 mini (packet loss and no current sensing)

#32 m013 closed 5 years ago
13
Add first dterm lowpass settings

#31 IllusionFpv closed 5 years ago
0
OMNIBUS F7 V2 Not working

#30 coppernanotube closed 5 years ago
1
esc pass-through and general esc problems with latest 4.1

#29 robert-hoffmann closed 5 years ago
3
Update stale / no-response bot configurations.

#28 mikeller closed 5 years ago
0
Talon F7 V2 no bidirectional DSHOT possible

#26 MartinFPV closed 5 years ago
10
MATEKF722 - ESC's don't arm since build 1613

#25 loomerco closed 5 years ago
2
CLRACINGF7 does not boot with 4.1.0 #1577 and bidircfg/.../DEFAULT.cf settings

#23 danielschafer closed 5 years ago
4
Fix DALRCF4 snippets

#20 rvdveen closed 5 years ago
0
Update CLRACINGF4.cf

#19 ShineT0T closed 5 years ago
0
rpmfilter: one motor output not working on SPEEDYBEEF4 (SBF4)

#21 elim99 closed 5 years ago
5
Missing target config file for rpm filter for clracingf7

#24 danielschafer closed 5 years ago
2
Bidirectional Dshot Piro F4 doesn't work with LED's enabled

#18 Yamaford closed 5 years ago
3
CLRacing F7 motors 3 & 4 not spinning with RPM filtering

#17 serran0 closed 5 years ago
4
Bidirectional DSHOT: KAKUTEF7 & Tekko32 Dshot invalid pkts at 90-100% but osd shows esc RPM

#22 avrahams closed 5 years ago
8
Issue with bidirectional dshot (motors unresponsive)

#16 drdrechronik closed 5 years ago
7
Continuous problem # 7754

#12 tryer50 closed 5 years ago
2
LED Conflict RPM filter

#27 Gaz-B closed 5 years ago
11
Softserial + smartport preventing arming/motor test with RPM filter

#14 entropy789 closed 5 years ago
4
Problem CL Racing F7

#15 tryer50 closed 5 years ago
0
When setting motor_pwm_protocol to dshot600, Gyro light goes off and Sonar light turns on

#13 mmakam2 closed 5 years ago
6
Need to set resource beeper none for rpm filter to work on CLRACINGF4

#11 mmakam2 closed 5 years ago
5
DALRC F405 upgrade snippet is missing dma setting for pin C06

#10 brackwasser closed 5 years ago
2
BF 4.0 RC6 Kakute f4v2 Motor 3 not spinning

#9 Teddygun300 closed 5 years ago
2
CLRACINGF4 (Bardwell board) RPM Filter, only motor 2 and 3 will spin

#8 mmakam2 closed 5 years ago
3
BF4 RC5, OminbusF4V6, remapped motors, 2 motors not working when dshot_bidi = ON

#7 wunderlins closed 5 years ago
4
Update DALRCF4.cf

#3 VirtualEnder closed 5 years ago
0
Rpm readings are off

#2 Oak-Fpv closed 5 years ago
2
BF 4.0 RC2 - DALRC F405 motors 1 and 2 not spinning (Dshot Bidir)

#4 digex closed 5 years ago
11
RPM filter motor grinding

#6 robert-hoffmann closed 5 years ago
26
BF 4.0 - CLRacing F4 motors 1 and 2 not spinning (Dshot Bidir)

#5 RadomirJ closed 5 years ago
34
FC frozen after add timer b00 1 timer b01 1

#1 RadomirJ closed 5 years ago
7