-
- [x] The issue is present in the latest release.
- [x] I have searched the [issues](https://github.com/brocaar/chirpstack-network-server) of this repository and believe that this is not a du…
-
Setting burst_width below sample_rate / fft_size will cause d_burst_width to be 0 and will later result in errors.
https://github.com/sandialabs/gr-fhss_utils/blob/57c4b832f149b65c06f0424bb4069a3a2…
-
is it possible to add futaba protocols like the FASSTest , FASST, and T-FHSS?
-
Hi,
We _HAD_ here the same transmitters. ~450mhz and may be triggered with a magnet.
Unfortunately, until I was able to fully implement it the meters were replaced by a new generation which uses 4 L…
-
I am trying to install gr-smart meters, and have not manged to make it happen.
Here is one of the problems during make
Generating __init__.pyc, google_map.pyc, google_earth.pyc
[ 41%] Built tar…
-
I have a number of planes with Airtronics receivers in them and would like to be able to fly them with a 4 in 1 module rather than use my old Airtronics Transmitter. I have opened one of the receiver…
-
```
What steps will reproduce the problem?
1.http://www.hobbyking.com/hobbyking/store/__27175__2_4Ghz_A_FHSS_Compatible_8CH
_Receiver_Hitec_Minima_compatible_.html
2. Set to PPM mode
3.
What is the e…
-
### Describe the behavior you would like
I need a simple but working FHSS example.
Like 50Hz two way FHSS.
I'm not looking for 1600hop/s like bluetooth.
Or if there is a simple solution for…
-
Hello,
I checked in the reference manual of the mcu and found that it doesn't support the Multihopping channel strategy.
Am I mistaken?
Thanks,
Ayoub
-
```
What steps will reproduce the problem?
1.http://www.hobbyking.com/hobbyking/store/__27175__2_4Ghz_A_FHSS_Compatible_8CH
_Receiver_Hitec_Minima_compatible_.html
2. Set to PPM mode
3.
What is the e…